Diesel Jeep Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi, as the title states I got the 100% full message on my car, along with code P2463. I used alfaobd to do 2 stationary regens, and noticed that the soot level percent didn't change at all. After the second regen it still said 116%, with a pressure difference at idle of .12. Driving it after the regen made the % full go up by seemingly a percent every 2-3 miles.

This happened after getting the "nearing full" message on my way to work, unfortunately I didn't have time to drive around and wait for the regen to happen, and on the way home it went to 100% full. The car has 195k miles on it, and is out of even the aem warranty. I'm hoping it's a sensor, since doing 2 regens did nothing to clear the filter according to the car. It's currently in limp mode, and makes a really smelly diesel exhaust smell. I'm on board with doing a delete, just finding where to get the pipes in the US is a challenge.
 
1 - 1 of 1 Posts
Top